| Brake pressure line to brake master cylinder, brake hose, distributor, brake calliper and hydraulic unit |
M10/M12 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Mounting for intermediate piece |
M6 x 14 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake calliper to front-axle wheel carrier |
M14 x 1.5 thread (always replace screws and lock nuts after removal.) |
Tightening torque |
140 Nm (104 ftlb.) |
|
|
| Brake calliper to rear-axle wheel carrier |
M12 x 1.5 thread (always replace screws and lock nuts after removal.) |
Tightening torque |
85 Nm (63 ftlb.) |
|
|
| Bleeder screw on brake calliper |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Brake pressure pipe to brake calliper |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Cap screws for brake lines |
M10 x 1 thread |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Brake booster to pedals |
M8 thread |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Brake booster to brake master cylinder |
M16 thread |
Tightening torque |
49 Nm (36 ftlb.) |
|
|
| Vacuum pump |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Vacuum pump (electric) |
|
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Hydraulic unit holder to body |
M6 x 30 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Hydraulic unit to holder |
M6 x 10 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|