| Fastening screw for vibration damper |
Replace |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| Fastening screw for vibration damper |
|
Final tightening |
+90° |
|
|
| Fastening screw for joint flange on pulley side |
Tighten in diagonally opposite sequence and in steps |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Fastening screw securing poly-V-belt pulley for coolant pump to coolant pump |
|
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Fastening screw for coolant pump |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Fastening screw on tensioning element for poly-V-belt pulley |
|
Tightening torque |
40 Nm (30 ftlb.) |
|
|