Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Flywheel to crankshaft (manual transmission) | Use new screw; fit crosswise and in stages | Initial tightening | 60 Nm (44 ftlb.) | ||
| Flywheel to crankshaft (manual transmission) | Final tightening | 90° | |||
| Flywheel to crankshaft (PDKit) | Use new screw; fit crosswise and in stages | Initial tightening | 60 Nm (44 ftlb.) | ||
| Flywheel to crankshaft (PDKit) | Final tightening | 90° |