LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Panamera Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> 9X - Electrical System - General -- PANAMERA (970) >> WM 9X00IN Measurement Of Closed-Circuit Current (Except PANAMERA S Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA GTS) >> Connecting The Measuring Device

Connecting The Measuring Device

  1. Use alligator clips to connect the measuring device to the battery ground and body ground.
  2. Remove ground strap from the body and secure against contact with the body. The entire vehicle current now flows through the ammeter.
  3. Place an additional short circuit bridge over the input socket of the measuring device to prevent damage to the measuring device.
scientia non olet · About LEMON Manuals