LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Panamera Base >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- PANAMERA (970) >> WM 428855 Replacing Upper Concave Washer (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Subsequent Work

Subsequent Work

  1. Clean joint areas and sheetmetal flanges with a wire brush.
  2. Prime joint areas and sheetmetal flanges with 2K primer.
  3. Restore standard seal with body sealant → 5X00IN SEAM SEALING .

    Also seal the repair area carefully.

  4. Paint repair area and adjacent surfaces, if necessary.
  5. Restore standard undersealing with underbody sealant → 5X00IN UNDERBODY PROTECTION .
  6. Apply standard cavity preservation → 5X00IN CAVITY PRESERVATION . Also carefully apply cavity preservation to the repair area.
  7. Install removed accessories in the repair area.

Install rear axle. → 420519 REMOVING AND INSTALLING REAR AXLE HOUSING (CHASSIS SUBFRAME) 

scientia non olet · About LEMON Manuals