LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> 58 - Rear Door, Central Locking -- PANAMERA (970) >> WM 582619 Removing And Installing Lock Peg (Except PANAMERA Executive, PANAMERA 4S Sport Edition PANAMERA 4 Executive) >> Installing Lock Peg

Installing Lock Peg

  1. Install lock peg -1-  .
    1. 1.1. Position lock peg and align according to the markings.
    2. 1.2. Screw in fastening screws -2-  .
      3. Fig 1: Installing Lock Peg
      G09810442Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully close door and check that the lock peg is positioned correctly with respect to the lock.
  3. Adjust the lock peg to suit the lock as required.
  4. Tighten fastening screws -2-  to the specified tightening torque Tightening torque 23 Nm (17 ftlb.)  until secure.
  5. Remove markings with isopropanol.
scientia non olet · About LEMON Manuals