Installing Alarm Siren

Position alarm siren on the retaining bracket and tighten fastening nut -1- .
Plug in electric connector -A- until it clicks into place.

Fig 1: Installing Alarm Siren
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position retaining plate -A- and tighten fastening screw -1- to → Tightening torque: 2.2 Nm (1.5 ftlb.) and fastening screw -2- to → Tightening torque: 13 Nm (9.5 ftlb.) .

Fig 2: Installing Retaining Bracket For Alarm Siren
Courtesy of PORSCHE CARS NORTH AMERICA, INC.