Removing Sealing Ring For Output Shaft

Engage a gear on the transmission in order to counter.
Loosen the nut on the output flange using socket-wrench insert Nr.203 .

Fig 1: Loosening Nut On Output Flange
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove output flange using a two-arm puller.

Fig 2: Removing Output Flange
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove sealing ring using slide hammer kit Nr.168 .

Fig 3: Removing Sealing Ring On Output Shaft
Courtesy of PORSCHE CARS NORTH AMERICA, INC.