LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Panamera 4S >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> 80 - Heating -- PANAMERA (970) >> WM 803019 Removing And Installing Heat EXCHANGER Supply Hose (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing Heat Exchanger Supply Hose

Removing Heat Exchanger Supply Hose

Information 

The heat exchanger connection must be closed off using a suitable stopper once the cooling water hose has been removed.

  1. Remove heat exchanger supply hose.
    1. 1.1. Loosen spring band clamps -2-  (-arrow A-  ).
    2. 1.2. Pull hose -1-  off the heat exchanger supply connection piece and cross panel connection piece -arrow B-  .
      Fig 1: Pulling Heat Exchanger Supply Hose
      G09813054Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals