LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Panamera 4S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (26 - Exhaust System 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 266519 Removing And Installing Secondary-Air Pump >> Removing Secondary-Air Pump With Bracket

Removing Secondary-Air Pump With Bracket

WARNING: This page is about a different variant/trim than selected.
  1. Remove the two M6 aluminium screws from the bracket. -4- 
    Fig 1: Secondary Air Pump With Mounting Components Location
    G15198844Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Secondary air pump with mounting

    1  Bracket
    2  Secondary-air pump
    3  Aluminium screw, M6
    4  Screw element
  2. When replacing the secondary-air pump, remove four aluminium screws for the bracket. -3- 
  3. Loosen spring band clamp on the secondary-air pump and pull off the line.
  4. Remove the design cover on secondary-air pumps with a separate cable plug. For details, see

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER)

    If you only want to move the secondary-air pump aside, the design cover can remain fitted.

  5. Pull off cable plug on secondary-air pump if necessary -1-  Remove secondary-air pump -2-  .
    G15198845Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cable plug for secondary-air pump

scientia non olet · About LEMON Manuals