LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Panamera 4S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (24 - Fuel System - Electronic Ignition 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 244619 Removing And Installing Intake-Air Distributor >> Information >> Component Overview

Component Overview

WARNING: This page is about a different variant/trim than selected.
Fig 1: Intake Module On Naturally Aspirated Engine Components Location
G15198749Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intake module on naturally aspirated engine

1  Intake module
2  Decoupling module (fastening part); observe specified tightening sequence
3  Screw, 5 x 16
4  Pressure sensor
5  Intake module seal; check that seal is aligned and fitted correctly!
6  Heat socket
7  Screw, 6 x 50
8  Electronic accelerator
9  Seal
10  Ball socket
Fig 2: Variable Intake Manifold Actuator On Naturally Aspirated Engine Components Location
G15198750Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Actuator for variable intake manifold on naturally aspirated engine

1  Pipe
2  Connecting piece
3  Variable intake manifold adjuster/adjusting unit
4  Lip seal
5  Connecting element
6  Vacuum unit with cover (actuator)
7  Screw, M5 x 16
8  Driver
9  Connecting link
10  Vacuum line
Fig 3: Intake Air Module On Turbo Engine Components Location
G15198751Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intakt air module on turbo engine

1  Intake module
2  Decoupling module (fastening part); observe specified tightening sequence
3  Screw, 5 x 16
4  Pressure sensor
5  Intake module seal; check that seal is aligned and fitted correctly
6  Heat socket
7  Screw, 6 x 50
8  Electronic accelerator
9  Seal
10  Ball socket