Exhaust Manifold/Turbocharger, Cylinders 4-6

Fig 1: Identifying Exhaust Manifold/Turbocharger (Cylinders 4-6)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Exhaust manifold/turbocharger
2. Manifold seal/replace 
3. Nut, M8/replace → Initial tightening: 20 Nm (15 ftlb.) → Final tightening: 27 Nm (20 ftlb.) 
4. Heat shield
5. Holder
6. Screw, M6 x 12 → Tightening torque: 10 Nm (7.5 ftlb.) 
7. Nut, M6 → Tightening torque: 10 Nm (7.5 ftlb.)