LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 195519 Removing And Installing Housing For Coolant Regulator >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install thermostat insert (coolant regulator). For details, see

    > 195819 REMOVING AND INSTALLING COOLANT REGULATOR (THERMOSTAT INSERT) 

  2. Install water pump.

    > 195019 REMOVING AND INSTALLING COOLANT PUMP 

  3. Install vacuum reservoir.

    > Refer to 245419 Removing and installing vacuum reservoir

  4. Fit intake-air distributor.

    > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR

  5. Fit cross panel

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL) (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE) - portion on "Installing"

scientia non olet · About LEMON Manuals