LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 793 (24 - Fuel System - Electronic Ignition 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 247019 Removing And Installing DME Control Unit >> Installing DME Control Unit

Installing DME Control Unit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the holder on the DME control unit and secure it with the fastening screws -3-  .
    G15198790Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing control unit holder

  2. Connect both connectors -1, -2-  on the DME control unit and close the latch -a-  .
    G15198791Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connecting connectors

  3. Secure DME control unit and holder.

    Position DME control unit and holder and secure with the fastening nut -2-  and the two fastening screws -1-  > Tightening torque 9.7 Nm (7.5 ftlb.)  > Tightening torque 9.7 (7 5 ftlb.) Nm 

    G15198792Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing DME control unit and holder

scientia non olet · About LEMON Manuals