Subsequent Work
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Clean remaining fuel from the high-pressure system before starting the leak test.
- Fit fuel collection pipe.
- Perform a leak test on the high-pressure system.
> Refer to 200101 Checking fuel system (high-pressure side) for leaks in the appropriate service information.
- Fit intake-air distributor.
- Connect the battery.
- Perform a test drive. Make sure the high-pressure pipes and threaded joints are sealed properly (visual inspection with engine running).
- Read out engine control unit fault memory after completing the work and print log. Compare with the previous log.