Technical Values
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Roof to front lid | D3 | Gap dimension | 10 mm | .2 mm | |
| Roof to front lid | D4 | Gap dimension | 1.7 mm | +/-0.5 mm | |
|
Roof to front lid |
|||||
| Front lid to rear lid | D5 | Gap dimension | 2.1 mm | +/-0.5 mm | |
| Front lid to rear lid | D6 | Gap dimension | 1 mm | +/-0.5 mm | |
|
Front lid to rear lid |
|||||
| Rear lid to roof | D7 | Gap dimension | 10 mm | +/-1.2 mm | |
| Rear lid to roof | D8 | Gap dimension | 0.8 mm | +/-0.5 mm | |
|
Lid to rear of roof |
|||||