LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (94 Lights, Lamps, Switches, Exterior -- (95B) MACAN) >> WM 943619 Removing And Installing Brake Light Switch (Except MACAN Sport Edition) >> Adjusting Brake Light Switch

Adjusting Brake Light Switch

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The brake light switch must be readjusted if the position of the brake pedal is changed after adjusting the brake light switch. The brake pedal must be unactuated at its end position when adjusting the brake light switch.
  1. Press tappet -1-  fully into the brake light switch -2-  .
  2. Disengage locking ring -3- and turn it approx. 60° anti-clockwise until it engages.
    G11984671

    Adjusting brake light switch 

  3. Release tappet -1-  on the brake light switch -2-  .
  4. Disengage locking ring -3- and turn it approx. 60° clockwise until it engages.
    G11984672

    Adjusting brake light switch