LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (94 Lights, Lamps, Switches, Exterior -- (95B) MACAN) >> WM 941516 Headlights - Basic Setting In The Body (Except MACAN Sport Edition) >> Adjusting Headlights (Basic Setting In The Body)

Adjusting Headlights (Basic Setting In The Body)

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The headlights are fitted into the body at the factory! 
  • The headlights must only be readjusted during accident repairs or if the headlights are being replaced! 
NOTE:
  • If work is carried out on the headlight or retainer plate, the installed fastening screws must be replaced by micro-encapsulated fastening screws (see PET).
  • Micro-encapsulated fastening screws must be tightened only once to the specified torque.
  • Micro-encapsulated fastening screws must be replaced after loosening them.
NOTE:
  • Adjust gap dimensions on lid and accessories in accordance with the gap specifications  .
  • Given a clearance in the opening that is too great or too small, the accessories must be centered with respect to the body  .
  • Ensure that the gaps do not run in a wedge-shaped fashion or do not narrow at local points  .
  • The given values are guidelines, which should be observed as far as possible  .
  • The guidelines apply to repair work and assembly work  .
  • Use star gauges to check the gap dimensions  . Star gauge WE 1690 

The headlight is aligned in the body by adjusting the headlight mounting points. → 941415 ADJUSTING HEADLIGHT MOUNTING 

scientia non olet · About LEMON Manuals