LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (64 Glazing, Window Operation -- (95B) MACAN) >> WM 644819 Removing And Installing Front Window Channel Seal (All Models Except For MACAN Sport Edition) >> Installing Front Window Channel Seal

Installing Front Window Channel Seal

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. The window channel seal is fixed to the molding and must always be replaced.
  2. Coat window channel seal with rubber lubricant before fitting.
  3. The new window channel seal comes with a protective film applied to the molding. The protective film must only be removed after fitting the window channel seal.
scientia non olet · About LEMON Manuals