LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (64 Glazing, Window Operation -- (95B) MACAN) >> WM 644049 Reworking (Coating) Front Door Window (All Models Except For MACAN Sport Edition) >> Applying Coating

Applying Coating

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The hydrophobic coating must not come into contact with water or other fluids for at least 30 minutes after applying the coating  .
  1. Apply hydrophobic coating agent as a flat liquid film and rub immediately and uniformly with a paper towel.
  2. A grey fog forms on the treated surface following application. Polish off this grey fog completely using a new, dry and clean paper towel.
  3. The coating must not come into contact with water or other fluids for at least 30 minutes.
    • Dried-on coating agent can be softened by rubbing it with the cloth soaked in coating agent and then wiping it off with a clean paper towel.
scientia non olet · About LEMON Manuals