Installing Rear Door
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order to removal.
- Tighten fastening screw on door hinge to Tightening torque 27 Nm (20 ftlb.) +/-3.5 Nm (+/-2.5 ftlb.) .
- Tighten fastening screw for door arrester to Tightening torque 33 Nm (24 ftlb.) .
95BAA1, 95BAB1, 95BAC1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAS1, 95BAX1, 95BAY1, 95BAZ1
Model year as of 2014
C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C45, C46, C96, C97, C98, C99