LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (66 Exterior Equipment -- (95B) MACAN) >> WM 669419 Removing And Installing B-Pillar Cover (Except MACAN Sport Edition) >> Installing B-Pillar Cover

Installing B-Pillar Cover

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Check that the fixing clips are not bent or broken.

Check that all fixing clips are positioned fully and correctly.

Replace damaged or missing clips with new ones.

Installation is performed in reverse order. Pay particular attention to the following:

  1. Tighten screws to the specified torque. Tightening torque 2.5 Nm (2 ftlb.) 
  2. Check that all rubber guides are fitted correctly.
scientia non olet · About LEMON Manuals