LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (66 Exterior Equipment -- (95B) MACAN) >> WM 669019 Removing And Installing Trailer Hitch (Except MACAN Sport Edition) >> Installing Trailer Hitch

Installing Trailer Hitch

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The self-locking nuts and screws must always be replaced  .
NOTE:
  • Another person is needed for removing and installing the trailer hitch because of its weight  .
  1. Position trailer hitch, guide wire harness through the bodyshell, engage grommet and secure with fastening screws.
  2. Tighten trailer hitch to the specified tightening torque Tightening torque 50 Nm (37 ftlb.)  until secure.
  3. Tighten trailer hitch to the specified torque angle Torque angle 90°  until secure.
scientia non olet · About LEMON Manuals