LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (66 Exterior Equipment -- (95B) MACAN) >> WM 668319 Removing And Installing Number Plate Cover (Except MACAN Sport Edition) >> Removing Number Plate Cover

Removing Number Plate Cover

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment  .
  • The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant 
  • Some steps must be carried out automatically  .
  • Some of the repair illustrations show only one side of the vehicle  .
  1. Unscrew fastening screws -1-  and remove number plate -2-  .
  2. Unscrew fastening screws -3, 4-  and remove number plate cover.
    G11981449

    Number plate cover 

scientia non olet · About LEMON Manuals