Subsequent Work
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Install ATF lines. → 386219 REMOVING AND INSTALLING LINE FOR ATF COOLING
- Secure the drive shafts on both sides. → 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT
- Fit heat shields for the drive shaft on both sides and secure with fastening screws -arrows-
.
Tighten fastening screws -arrows- . Tightening torque 23 Nm (17 ftlb.)
Heat shield for drive shaft
- Fit left heat shield -1-
and secure with fastening screws -2-
. Tightening torque 8 Nm (6 ftlb.) +/-1.5 Nm (+/-1 ftlb.)
Catalytic converter heat shield, left
- Fit right heat shield -1-
and secure with fastening screws -2-
. Tightening torque 8 Nm (6 ftlb.) +/-1.5 Nm (+/-1 ftlb.)
Catalytic converter heat shield, right
- Install catalytic converter. → 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER
- Install engine. → 100119 REMOVING AND INSTALLING ENGINE
95BAB1, 95BAF1, 95BAS1, 95BAX1, 95BAY1
Model year as of 2014, Model year up to 2020
C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99