Installing headliner
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Make sure that the roof cover does not buckle.
NOTE:
Check that the fixing clips are not bent or broken.
Replace missing or damaged fixing clips with new ones.
Make sure that all fastening clips have engaged correctly.
Check that they are fitted correctly.
- Installation is performed in reverse order to removal.
- Tighten fastening screw under the roof console to Tightening torque 5 Nm (3.5 ftlb.) .
- Tighten fastening screw on the net cover holder to Tightening torque 9 Nm (6.5 ftlb.) .