LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 612 (42 Rear Wheel Suspension, Drive Shaft -- (95B) MACAN) >> WM 420919 Removing And Installing Rear Tie Rod >> Removing and installing rear tie rod >> Removing tie rod

Removing tie rod

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
G11984997

Tie rod 

  1. Mark the position of the toe eccentric adjuster with respect to the chassis subframe for re-installation.
  2. Unscrew fastening screws -1-  for the tie rod -2-  at the chassis subframe (eccentric screw) and at the wheel bearing housing.

    2.1. Use interchangeable head T40183  for fastening screw on the chassis subframe.

  3. Remove tie rod.
scientia non olet · About LEMON Manuals