LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 741619 Removing And Installing Suction Fan For Backrest Surface (Except MACAN Sport Edition) >> Installing Suction Fan For Backrest Surface

Installing Suction Fan For Backrest Surface

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Fixing clips on the seat frame will be damaged irreparably during removal. Replace expansion rivets and fixing clips during installation and do not re-use them.

  1. Position suction fan -1-  on the backrest frame and insert it into the rubber flange (air guide) -2-  (-arrow-  ).
    G11982060

    Positioning suction fan 

  2. Secure the suction fan on the backrest frame with two plastic expansion rivets -2-  .
    G11982061

    Expansion rivets 

    1. 2.1. Fit expansion rivets -2-  .
    2. 2.2. Fit plastic pins -1-  on the expansion rivets -2-  and press them through using a mandrel.
  3. Plug in electric plug connection for suction fan -arrows-  .
    G11982062

    Plugging in connector for suction fan 

  4. Attach cover for rear backrest at the top -arrow-  .
G11982063

Attaching cover 

scientia non olet · About LEMON Manuals