LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 741319 Removing And Installing Cover For Front Seat (Except MACAN Sport Edition) >> Installing Cover For Front Seat

Installing Cover For Front Seat

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit seat cover with padding on the seat frame.
  2. On vehicles with seat-surface extension:  Engage seat extension straps at both sides.
    G11982040

    Engaging straps for seat-surface extension 

    1. 2.1. Lift up padding for rear seat.
    2. 2.2. Guide seat-surface extension strap -2-  through from top to bottom -arrow A-  and slide it onto the bar -arrow B-  .
    3. 2.3. Slide the bar -1-  through the seat-surface extension strap -2-  and the tab on the cover -3-. 
  3. Pull the cover back between the padding for the seat and backrest -arrows C-  .
    G11982041

    Pulling cover to the rear 

  4. Attach the cover at the rear -arrows D-  .
    G11982042

    Attaching cover at the rear 

  5. Attach the cover at the rear -arrow E-  .
    G11982043

    Securing cover at the sides 

  6. Attach the cover at the sides -arrows F-  .
  7. Fit expansion rivet -4-  .

    Information 

    Fixing clips on the seat frame will be damaged irreparably during removal. Replace expansion rivets and fixing clips during installation and do not re-use them.

  8. Attach the cover at the front -arrows G-  .
    G11982044

    Attaching cover at the front 

  9. On vehicles with seat-surface extension:  Attach the cover on the seat-surface extension -arrows H-  .
  10. Attach the cover at the sides -arrows I-  .
    G11982045

    Attaching cover at the sides 

  11. Engage the bracket -6-  from below -arrow J-  .
    G11982046

    Securing bracket at the sides 

  12. Tighten fastening screws -5-  (Tightening torque 7.5 Nm (5.5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)  ).
  13. Fit fixing clip -7-  .

    Information 

    Fixing clips on the seat frame will be damaged irreparably during removal. Replace expansion rivets and fixing clips during installation and do not re-use them.

    G11982047

    Securing cover at the rear 

  14. Attach cover at the rear -8-  (-arrow K-  ).
  15. On vehicles with heated seats:  Plug in connector for seat heating.
G11982048

Plugging in connector for seat heating 

  1. 15.1. Plug in electric plug connection for seat heating -1-  (-arrow A-  ) until the connector engages securely.
  2. 15.2. Plug in electric plug connection for seat heating for seat-surface extension -2-  (-arrow B-  ) until the connector engages securely.
scientia non olet · About LEMON Manuals