Removing Pressure Pipe
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen screw-type clamp -2-
and pull off pressure hose -1-
.
Pressure hose at top of pressure pipe
- Disconnect electric plug connection -1-
on the pressure sensor and expose the cable.
Removing and installing pressure sensor
- Loosen screw-type clamp -2-
and pull off pressure hose -1-
.
Pressure hose at bottom of pressure pipe
- Loosen fastening nuts -1-
, disconnect line -4-
and remove pressure pipe -2-
.
Pressure pipe on body