Pot. 1, convertible top
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The values between pot. 1, calibration value 1, and pot. 1, calibration value 6, are calculated as percentage by the convertible-top control module.
If the actual values (measured values) of calibration values 1 and 6 differ, the convertible-top potentiometer must be replaced. Refer to REMOVING AND INSTALLING POTENTIOMETER FOR CONVERTIBLE-TOP INTERROGATION .
- Pot. 1 calibration value 1 Tester display must be less than < 1.6 volts
- Pot. 1 calibration value 2
- Pot. 1 calibration value 3
- Pot. 1 calibration value 4
- Pot. 1 calibration value 5
- Pot. 1 calibration value 6 Tester display must be greater than > 3.0 volts