Removing and installing drive shaft (Tiptronic transmission): Tools
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION
| Item | Designation | Special tool | Explanation |
|---|---|---|---|
| A | Torx screwdriver | 9546 | To counter the ball joint when assembling and disassembling the fastening nuts. |
| B | Press-out tool (ball joint extractor) | 9560 | To press out the ball joints on the wheel carrier. |
| C | Protective tube | Shop-made | For protecting the drive shaft, the diameter is approx. 30 mm |
| D | Universal wheel hub extractor | Commercially available | To press the drive shaft out of the wheel hub |