Removing and installing front wheel bearing: Tools
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION
| Item | Designation | Special tool | Erl"AUML"Auterung |
|---|---|---|---|
| A | Pressure piece | P 297 A | For pressing out the wheel hub |
| B | Separator (12-115 mm diameter) | Commercially available | Used as a support when pressing out the wheel hub and when pressing the wheel bearing inner race off the wheel hub |
| C | Tubular piece | VW 415 A | For pressing the wheel bearing out and in |
| D | Pressure piece | 9247/4 | Use in combination with tubular piece C to press in the wheel bearing |