LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Front Wheel Suspension, Drive Shafts - 911 CARRERA (996)) >> Removing and installing front drive shaft >> Tools

Removing and installing front drive shaft: Tools

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Tools Used For Front Drive Shaft
G03105664Courtesy of PORSCHE OF NORTH AMERICA, INC.
SPECIAL TOOLS DESCRIPTION

Item Special tool designation Remarks
A Torx screwdriver 9546 To counter the ball joints (track rod and joint mount) during assembly and disassembly.
B Ball joint extractor (track rod extractor), commercially available  
C Press-out tool (ball joint extractor) 9560 To press out the ball joint on the wheel carrier.
scientia non olet · About LEMON Manuals