Permissible combinations

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Front-axle cross member with one fastening bore -F1- and body with one fastening point -K1-. See Fig 1 .

Fig 1: Identifying Permissible Combinations (1 Of 2)

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Standard construction up to end model '01.

Front-axle cross member with two fastening bores -F2- and body with two fastening points -K2-. See Fig 2 .

Fig 2: Identifying Permissible Combinations (2 Of 2)

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Standard construction as of model '02.