Allocating the front-axle cross member to the body: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Material damage will result in the area of the axle mount/axle fastening due to reduced strength, if correct allocation is not observed!
- Only install permissible combinations of front-axle cross member to the body (standard construction)!
- Do not install front-axle cross members with one fastening screw (F1) in vehicles with two body mounting points (K2)!