LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 619119 Removing And Installing Additional Flap (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Additional Flap >> Removing Actuating Cable

Removing Actuating Cable

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen actuating cable.
    Fig 1: Loosening Actuating Cable
    G09994638Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Press locking lug -3-  (-arrow A-  ).
    2. 1.2. Screw off collar nut -2-  .
    3. 1.3. Push actuating cable -1-  down -arrow B-  and remove it -arrow C-  .
scientia non olet · About LEMON Manuals