Installing Actuating Cable

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The metal tab is only installed on the left side of the vehicle.

Engage metal tab -1- at the actuating cable -2- .

Fig 1: Fitting Metal Tab
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit actuating cable.

Fig 2: Fitting Actuating Cable
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 2.1. Insert actuating cable -arrow A- and press it up -arrow B- .
2. 2.2. Screw on collar nut.
Adjust actuating cable.
1. 3.1. Adjust actuating cable to dimension -X- by turning the collar nut. Distance 6.6 mm
  
  Fig 3: Adjusting Actuating Cable
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.