LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 614519 Removing And Installing Rubber Seal With Rail (Front) (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Front Retaining Strip

Installing Front Retaining Strip

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit retaining strip -2-  .
    Fig 1: Installing Front Retaining Strip
    G09994547Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit new fastening screws -4-  .
  3. Press the retaining strip completely up -arrows A-  and forward -arrow B-  .
  4. Tighten fastening screws to the specified tightening torque.
  5. Secure convertible top covering -1-  with rivets -3-  on the retaining strip -2-  .
    Fig 2: Identifying Rivets On Front Retaining Strip
    G09994548Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals