LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 610119 Removing And Installing Convertible Top (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The convertible top must be moved to various positions in order to gain the best possible access to the fitting areas shown below.

Information 

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown:

  1. Remove rear seat cushion. → 745719 REMOVING AND INSTALLING REAR SEAT CUSHION .
  2. Remove wind deflector. → 684719 REMOVING AND INSTALLING WIND DEFLECTOR .
  3. Remove belt deflector clip. → 691119 REMOVING AND INSTALLING FRONT THREE-POINT BELT .
scientia non olet · About LEMON Manuals