Group 27 - Starter, Power Supply, Cruise Control
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Retaining bar on cowl panel frame or battery console | Collar nut, M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Terminal clamp to battery terminal | M6 nut | Tightening torque | 6 Nm (4.5 ftlb.) | ||
| Ground lead of battery to cowl panel frame | Collar nut, M8 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Rail on battery console | Hexagon-head bolt, M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Battery console to holder | Hexagon-head bolt, M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Holder for battery console to body | Hexagon-head bolt, M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Generator to bracket | External Torx screw, M8 x 90 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Starter to crankcase | External Torx screw, M10 x 35 | Tightening torque | 45 Nm (33 ftlb.) | ||
| Starter cable to terminal 50 | Hexagon nut, M6 or hexagon-head bolt, M6 | Tightening torque | 7 Nm (5 ftlb.) | ||
| B+ line to starter | Collar nut, M8 | Tightening torque | 18 Nm (13 ftlb.) | ||
| B+ line to generator | Collar nut, M8 | Tightening torque | 18 Nm (13 ftlb.) |