LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (63 - Bumpers -- 911 CARRERA (991)) >> WM 637019 Removing And Installing Trim Frame For Tailpipe Cover (Gt3 & Gt3 RS) >> Installing Trim Frame For Tailpipe Cover

Installing Trim Frame For Tailpipe Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order to removal. Pay particular attention to the following: 

  1. Tighten fastening screws to the specified torque. Tightening Torque 2.5 Nm (2 ft. lbs.) 
scientia non olet · About LEMON Manuals