Removing Tailpipe Shield Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Skirt

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Some of the repair illustrations show only one side of the vehicle.
Naturally, some steps also have to be performed on the opposite side of the vehicle as well.

Insert a screwdriver between the tailpipe shield cover -1- on the rear apron and rear skirt -2- and release the locking lugs all the way around at the same time -arrow A- .

Fig 2: Removing Tailpipe Shield Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press tailpipe shield cover -1- out of the rear apron -2- (-arrow B- ).