LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2015 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (13 - Engine - CRANKGEAR, Pistons -- 911 CARRERA (991)) >> WM 137619 Removing And Installing Pulley (Gt3, Gt3 RS) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Pulley to crankshaft Fastening screws Initial tightening 10 Nm (7.5 ftlb.)    
Pulley to crankshaft Fastening screws Final tightening 90°    
scientia non olet · About LEMON Manuals