Installing Tail Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Push the central connector for the tail light together until the connector engages securely.

Fig 1: Inserting Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install tail light.

Fig 2: Installing Tail Light
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 2.1. Slide the outside of the tail light into the holder at the side.
2. 2.2. Engage the inside of the tail light.
3. 2.3. Position the tail light according to the size of the gap and screw in the top fastening screw -1- first. → Tightening torque: 5 Nm (3.5 ftlb.)+10 %-15 %
4. 2.4. Tighten the bottom fastening screw -1- . → Tightening torque: 5 Nm (3.5 ftlb.)+10 %-15 %