Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connection between transmission and engine | M10 | Tightening torque | 45 Nm (33 ft. lb.) | ||
| Support for clutch control shaft | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Air flange, left | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw between transmission housing and slave cylinder | M10 x 35 | Tightening torque | 45 Nm (33 ft. lb.) | ||
| Fastening screw between transmission housing and slave cylinder support | M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Connection between slave cylinder and pressure line | M12 | Tightening torque | 20 Nm (15 ft. lb.) |