TV Rear Spoiler
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nuts for spoiler drive | Item 7 | Tightening torque | 9 Nm | ||
|
Securing spoiler drive |
|||||
| Fastening screws for spoiler drive | Item 6 | Tightening torque | 9 Nm | ||
|
Securing spoiler drive |
|||||
| Fastening screw securing lower part of rear spoiler to spoiler drive | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Loosening lower part of rear spoiler |
|||||
| Fastening screw securing closing element of rear spoiler to spoiler drive | Item (B) | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | |
|
Installing closing element of rear spoiler |
|||||
| Fastening screw securing spoiler drive (wing) to spoiler drive | Item 1 | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | |
|
Installing spoiler drive (flap) |
|||||
| Fastening screw securing lower part of rear spoiler to spoiler drive | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Installing lower part of rear spoiler |
|||||
| Gap from bolt to bolt (inner side) | Dimension A | Adjustment value | 556 mm | ||
|
Laying spoiler drive onto special tool |
|||||
| Fastening nut securing spoiler drive to engine housing | Tightening torque | 1 Nm (0.5 ftlb.) | |||
|
Screwing off spoiler drive nuts |
|||||
| Fastening screw securing closing element of rear spoiler to spoiler drive | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Installing closing element of rear spoiler |
|||||
| Fastening screw for securing rear spoiler microswitch to spoiler drive | Tightening torque | 1 Nm (0.5 ftlb.) | |||
|
Installing wire harness for rear spoiler |
|||||
| Fastening screw securing cover on lower part of rear spoiler to spoiler drive | Tightening torque | 4.5 Nm (3 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Securing cover on lower part of rear spoiler |
|||||
| Distance from reversing lever to limit stop | Distance | 20 mm | |||
|
Moving motor for spoiler drive into adjustment position |
|||||