TV Rear Apron
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear apron fastening screws | Tightening torque | 2.8 Nm (2.1 ftlb.) | +/-0.5 Nm (+/-0.5 ftlb.) | ||
|
Screws on frame for light |
|||||
| Lateral retaining strip | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing lateral retaining strip |
|||||
| Centre retaining strip to end plate | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Centre retaining strip |
|||||
| Lower retaining strip to end plate | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing lower holder |
|||||
| Fastening screw for holder with heat protection | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing holder with heat protection |
|||||
| Fastening nut for holder with heat protection | Tightening torque | 4.8 Nm (3.5 ftlb.) | +/-1 Nm (+/-0.5 ftlb.) | ||
|
Removing holder with heat protection |
|||||
| Fastening screw securing bumper to bodyshell | Tightening torque | 65 Nm (48 ftlb.) | +/-6.5 Nm (+/-5 ftlb.) | ||
|
Removing bumper |
|||||