TV Centre Console

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value	Tolerance 1
Fastening screw securing lower part of center console cover		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing cover
Fastening screw at top of center console		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Securing center console at the top
Centre console fastening screws in package box		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Securing center console
Fastening screw for front ashtray		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing front ashtray
Front fastening screw securing center console to center tunnel	Torx screw	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Front screws
Rear fastening screw securing center console to center tunnel	Torx screw	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Installing center console
Fastening screws for cover extension in storage compartment		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing extension for cover in storage compartment
Lower fastening screw for cover extension in storage compartment		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)
Securing extension for cover in storage compartment
Fastening screws, rear		Tightening torque	27 Nm
Installing rear center console (Business)
Fastening screw, front and bottom		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Screwing in fastening screws at the front, bottom and sides
Fastening screws securing damper to package box cover		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.5 Nm (+/-0.5 ftlb.)
Securing damper
Fastening screws securing bracket to center console		Tightening torque	2.5 Nm	+/-0.5 Nm (+/-0.5 ftlb.)

Fig 1: Identifying Bracket In Rear Centre Console

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Rear cupholder (Business) to center console		Tightening torque	1.5 Nm (1 ftlb.)	+0.2 Nm (+0.1 ftlb.)	-0.4 Nm (-0.2 ftlb.)
Screwing in fastening screws