Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Sliding-roof panel to roof (D1) | Lowered only | Gap dimension | 0 mm | -1 mm | |
|
Gap dimension |
|||||
| Sliding-roof panel to roof (D2) | Raised only | Gap dimension | 0 mm | +1 mm | |
|
Gap dimension |
|||||
| Rear spoiler to rear window (H3) | Gap dimension | 4 mm | +1 mm | -0.5 mm | |
|
Gap dimension |
|||||
| Rear spoiler to rear window (H4) | Gap dimension | 3 mm | +/-1 mm | ||
|
Gap dimension |
|||||
| Rear spoiler to rear lid (H5) | Gap dimension | 4 mm | +/-0.5 mm | ||
|
Gap dimension |
|||||
| Rear spoiler to rear lid (H6) | Gap dimension | 1 mm | -1 mm | ||
|
Gap dimension |
|||||
| Gap dimension from outer edge of film to radial run-out line | Item X | Gap dimension | 40 mm | +/-1 mm | |
|
Affixing stone guard film |
|||||
| Gap dimension from lower edge of door to lower edge of film | Item Z | Gap dimension | 2 mm | +/-1 mm | |
|
Affixing stone guard film |
|||||